Go Back a Page
Return to Home Page
- Here are a few examples of my work. The information has been
edited to protect proprietary information.
-
-
Fluid Flow in Open and Porous Regions - FEA
using flexPDE
-
-
3D Flow Chambers with a
Porous Separator
-
-
Flow in an Electrochemical
Etching Cell
Colliding Flow from a Porous
Membrane in a Channel
Convective Diffusion
of a Small Cloud of Bubbles
Diffusion Across Channels
and Through Pores
Fluid flow Around Teeth - Pressure and Shear
Force
-
Reacting Fluid Flow - FEA using flexPDE
-
-
Reactive Flow with a Variably Porous Separator Membrane
-
-
Reactive Flow through a Central Diffusion Region
-
-
Two Phase Fluid flow - FEA using flexPDE
-
-
2
Phase Fluid Flow in a Chamber with Porous Wall
-
Pin Holes in Porous Membranes
-
-
Pin Hole
Fluid Flow "Stealing" in Porous Membranes
Comments Regarding
my Fluidics and Microfluidics Design and Analysis Work:
- During the seven years I worked
as a fuel cell engineer at Neah Power Systems, I became a dedicated student of fluid
dynamics, both at the bench and using the Finite Element Analysis (FEA) method
with flexPDE and Comsol solvers. My work has
included designing, testing and analyzing a variety of fluidic devices and
scenarios.
-
- As I gradually grew more competent in this area of work, I learned how
to model two phase flow and "bubbly" fluid flow in homogeneously reacting porous-media flow
regions.
Go Back a Page
Return to Home Page
Copyright © 2022 [Nelson Research, Inc]. All rights reserved.
Send mail to
craig@nelsonresearchinc.com with
questions or comments about this web site.